The most difficult material to handle is Steel Scrap, as it comes in all sizes & shapes & never the same, we have manufacture extreme strong 2.5 m3 grab bucket- Electro Hydraulic Orange Peel Grab with relatively low dead weights to combine extreme strength & durability.
|capacity||1.0 – 3.0(t/m3)|
|2.5 m3 grab||coal, ore iron|
|Grab Teath||4 – 9|
The grabs for ideal decision for any port crane, barge crane or cargo ship. Stimulation of grabs can be wired or wireless remote control. The Apr grabs have developed multiple type of grab models, keeping in mind grabs shells/tine/teeth, & shape & space between the shells/tine/teeth. We offer Electro Hydraulic Orange Peel Grabs for each specific application.
2.5 cubic meter grab bucket Specifications
- Only Imported hydraulic components used for grab
- Suitable for all kinds of lifting applicants
- Grabs are made of Hardox steel are light, rigid and anti-abbrasive, ensure long lasting wear protection.
- Material DENSITY HANDLING CAPACITY UPTO 8.0 T/CBM
- Electro Hydraulic Orange Peel Grabs are with Hydraulic block integrated safety functions propositioned overload pressure, combining ball valve, check valve and pressure relief valve.
- Teeth or Tines ranging from 4 to 9 Numbers. depending on the size and loading needs.
Grabs made of pure steel are light, rigid & wear-resistant, ensure long lasting wear protection. Electro Hydraulic Orange Peel Grabs steel-work is made of high quality & resistant materials, while, wireless Radio Remote for controlled opening in mid-air with operating distance of 100 Meters for Electro Hydraulic Orange Peel Grabs opening & closing. Grabs comes with Manifolds integrated safety functions against overload pressure, combining ball valve, check valve & pressure relief valve.
Steel Scrap Handling Grab – Steel Melting Furnace Charging Grab
The Apr Electro Hydraulic Orange Peel Grabs equipped with valves that allow: –
- Control the pressure differentiated in closing & opening operation with 2.5 m3 grab.
- The Control of the Teeth/Tines during the closure to avoid capitation.
- Maintaining the pressure of the teeth/Tines even.
- Protecting circuit from overloads induced by excessive stress.
The use of a Hydraulic Pump with high performance & presence of an unloading valve on the closing side of the circuit makes the equipment suitable even for heavy work.
2.5m3 3m3 capacity mechanical clamshell grab bucket
|Grab Type||Material||Material capacity(t/m3)|
|Light Grab||Dirt, clay, brick, Coke, slag, Cereals, potatoes||1.0–1.5|
|Medium Grab||coal, salt, brick, alumina, cement, water, sand||>1.5–2.5|
|Heavy Grab||Ore iron, hard rock, shaped iron oxide, lead ore concentrate||>2.5–30|
|Super Heavy Grab||Lump ore, manganese ore, bulk deposition of ore powder caking||>3.0|